BD Water Purifier

Pureit Wave RO+MF

Original price was: ৳ 16,500.00.Current price is: ৳ 15,800.00.

  • Brand: PureIT
  • Model: Pureit Wave RO+MF
  • Dimension: Height-15 inch, Width-12.9 inch, Depth-12.9 inch
  • Purification Stage: 6 Stage
  • Family Usable: 1-8 Persons
  • Technology: RO Membrane (USA Technology)
  • Reserve Tank Capacity: 6 Liters
  • Production Capacity: 20 Liters per Hour
  • Call: 01616125130
- +
Introducing the Pureit Wave RO+MF.
Pureit’s one of the latest water purifier with high-speed purification at the best price ensures 100% RO purified water by removing Viruses, Bacteria, Chemicals & Heavy Metals like Iron.

Features

 

Pureit Wave RO+MF In-tank

Best in class Pureit Wave RO+MF Reverse Osmosis Water Filter with 6 Litres Storage.

1744722159-15848406.png

Advanced 7-Stage Purification

To ensure you get safe drinking water with multistage protection.

1744722244-8407378.png
Large 6 Litres Storage

6 litres storage Ensures purified water all day.

High Speed 20L/Hour Purification

Best-in-class purification that gives you 20 litres of safe RO water in less than 1 hour.

Adds Essential Minerals

Get 100% RO water enriched with essential minerals like Calcium & Magnesium. No bypass.

1745779063-28605018.png

Safety from Water-Borne Disease

Kills up to 99.9% bacteria, virus & cyst with highly effective UV lamp.

Specifications

 

Purified Water Flow Rate (Average)* Approximately upto 20 Litre per hour
Purification Capacity Germkill Kit™ is designed to give approximately 6000L^ of purified water depending on input water pressure, TDS and water temperature
Membrane Type Thin film composite spiral wound
Material of Construction Food safe, non-toxic, engineering-grade plastics
Pump Type Diaphragm pump 24V DC
Purification Capacity (CSF Germkill Kit™) Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts
GermKill Performance Standard Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA
% Recovery * Typically 45%
TDS Reduction** 90% (Min)
Power Rating 37 Watts
Pressure Rating 10–30 PSI
Operating Voltage 100–240 Va.c 50/60 Hz (100–300 Va.c 50/60 Hz)
Length of Power Adapter 1.5 metres
Total Dissolved Solids Upto 2000 mg/lit (max)
Total Hardness 500 mg/lit (max)
Iron in Input Water 0.3 mg/lit (max)
Turbidity of Input Water 1 NTU (Max)

Germkill Kit

Pureit Wave RO+MF GKK – 4,000*

Specifications for Germkill Kit

Purification Capacity Germkill Kit™ is designed to give approximately 6000L^ of purified water depending on input water pressure, TDS and water temperature
Purification Capacity (CSF Germkill Kit™) Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts
Material of Construction Food-safe, non-toxic, engineering-grade plastics
GermKill Performance Standard Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA

Disclaimer
~ “Purity” here refers to the TDS range of water
^ “Quality” here refers to the TDS range of water
^^ Depend on your water quality
^^^ You can see the quality of water through the purity indicator only when water is being purified or the purifier is in use
# Advance Alert SystemTM will alert you 15 days before every 180 days (approximately) or 15 hours before completion of every 200 hours of pump running time, whichever is earlier. The purifier will communicate the alert only if the purifier is in switched-on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut-Off TM of water will be activated automatically for GKK only, even if the purifier is in switched-off condition.
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements
** 10 litres of storage only with running water. Or else 9.2 litres of water dispensing.
*** Input water quality and TDS content are important determinants of output water quality.
**** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is lesser than 10 PSI, then you need to buy ‘Pressure enhancing pump at an additional cost. Device should not be installed in a house where input pressure is greater than 60 psi.
##Technical specifications are subject to change or improvement without prior notice
### In case the TDS is > 1000 ppm, a company provided anti-scalant is recommended to be installed, this has to be purchased at extra cost.
#### If the iron content in the input water is more, it is recommended to install a company provided iron filter.
Physical product may vary from the image on the website

 

Customer’s FAQ

How does Pureit Wave RO+MF purify water?

 

It uses 7 stages of purification:
Stage 1:  i-Sediment Filter
Removes small and ultra-fine particles or sediments from the water and extends the filter’s lifespan.
Stage 2: Pre-RO Carbon Filter
Removes chlorine and harmful chemical substances such as pesticides. Also eliminates bad odor and impurities, including complex compounds often present in water.
Stage 3: Mesh Filter
Removes ultra-fine particles and dirt that may still be present in the water.
Stage 4: RO Membrane
Removes chlorine, bacteria, harmful chemicals, and dissolved solids such as TDS (Total Dissolved Solids), iron, aluminum, and heavy metals.
Stage 5: Post Carbon Filter
Acts as a polisher and improves the taste of purified water.
Stage 6: Micro Filtration Filter
Post-RO water goes through a microfiltration membrane that removes bacteria and viruses, ensuring even safer drinking water.


What is the water storage capacity of Pureit Wave?

 

Pureit Wave comes with a 6-liter storage tank. The tank is fully microchip-controlled, and once you draw water from it, the system automatically starts the purification process again to refill the tank.


Does Pureit Wave RO+MF remove arsenic, fluoride, and nitrate?

 

Yes, Pureit Wave RO+MF’s RO technology is capable of removing arsenic, fluoride, nitrate, and even iron up to certain limits.


How can I replace the Germkill Kit (GKK) / Sediment Filter (SF)?

 

To ensure your Pureit filter functions effectively, it’s important to monitor and replace the Germkill Kit (GKK) and Sediment Filter (SF) as needed. You can contact customer care, and a representative will visit your home to replace them.


How often should I replace the Germkill Kit (GKK) / Sediment Filter (SF)?

 

GKK should be replaced after 6,000 liters of purified water usage under Pureit test conditions, and sediment filter will be included in GKK. However, based on input water quality, the Litrage amount might vary from the standard values. If you notice a decrease in water flow or bad taste, earlier replacement is advised.


How long does Pureit Wave take to purify water?

 

Pureit Wave can purify up to 20 liters of water per hour under Pureit test conditions. The purification speed depends on filter condition, inlet water pressure, TDS level, and the presence of various impurities in the water.


What should I do if the purifier is left open?

 

If the purifier is left open, dust and dirt from the environment may enter and accumulate in the chamber. It’s best to keep the purifier closed at all times and store it in a clean area.


Can the rejected water be used?

 

No, reject water should not be used for drinking or cooking. However, it can be used for watering plants or floor cleaning.


Can I drain the first chamber water from the purifier by myself usually?

 

No. You should only drain the first full chamber of water during installation or the first time the Germkill Kit (GKK) is replaced. This is necessary to ensure quality.


What should I do if water leaks from the filter?

 

Turn off the ball valve and call the helpline at 16627.


How long can the stored water in Pureit Wave be kept?

 

The purifier can store up to 6 liters of water. Stored water should be consumed within 1 day. If it is stored for longer, it should be discarded and the tank should be refilled with fresh water.


How can I get after-sales service for my Pureit device?

 

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).


What should I do if the water tastes or smells unusual?

 

If you experience issues like unusual taste or odor, first drain one full bucket of water from the chamber. If the issue persists, check the purifier for leaks or consider getting it cleaned by a technician.


 

Reviews

There are no reviews yet.

Be the first to review “Pureit Wave RO+MF”

Your email address will not be published. Required fields are marked *

fourteen + 2 =