The amount of electricity used by water purifiers is insignificant. It consumes 25 watts of electricity. If a family consumes 15 liters of drinking water per day, their annual electric consumption will be around 1.52 units. The power consumption of different models may change slightly.

The filtered water can be used for up to 48 hours. After 48 hours, we recommend discarding the water, refilling it, and drinking it.

In drinking water, there are two types of contaminants: suspended and dissolved:

a) Suspended pollutants like dirt, dust, sand, germs, viruses, and other contaminants

b) Dissolved pollutants such as pesticides, arsenic, and fluoride, as well as heavy metal salts such as mercury, lead, copper, and cadmium.

Water purification is the process or method by which water is purified of impurities of any kind. Physio-chemical contaminants to microorganisms are among the pollutants. Depending on the nature of the contaminants, the water purification process may include several processes. These processes may vary depending on the type of water.

Water molecules are driven through a 0.0001 micron semipermeable membrane by water pressure in reverse osmosis. A line of TFC (Thin Film Composite) sheets is expertly bonded together and wound up in a spiral around a hollow core tube. The size of these tubes is determined by the amount of water that needs to be treated. The reverse osmosis purification method is primarily used to reduce the’salt content’ of water.

Cost and purification to the point of usage are the two primary or vast differences between purified and bottled water.

Water that is physically, chemically, and microbiologically pure is provided by an effective water purifier. It also assures that the water is 100 percent pure at the moment of usage, with no chance of contamination. At the point of usage, bottled water is not filtered. As a result, if strict quality control measures are not followed, there is a risk of recontamination. When bottled mineral water is drank on a daily basis, it becomes costly.

Water treatment is similar to any other type of treatment. The key to treating the water is to discover out what’s wrong with it. The proper purification technology must be chosen based on the TDS of the water input

That is a common misunderstanding! Aqua guard does not deplete your drinking water of important minerals. There is a mineral modulator in the water that is specifically intended to induce electromagnetic vibrations. This helps to keep the vital minerals in the water and prevents the production of mineral scale inside the UV chamber.

Cool, clean containers, preferably made of steel or glass, should be used to keep the filtered water.

It is better to change the stored water every two days for sanitary reasons. The water in the storage filter tends to proliferate bacteria, thus it should be used and replaced on a regular basis.

Drinking water should have a TDS (Total Dissolved Salts) value of 500 ppm (parts of salt per million parts of water) or less, according to the BIS (Bureau of Indian Standards). If such quality is not available, a compromise level of up to 2000 ppm water can be used.

Reverse osmosis, often known as hyper filtration, is the most advanced filtration method currently accessible. The most convenient and effective form of water filtering is reverse osmosis (RO).

The method of forcing water through a semi-permeable membrane under pressure with a pore size of 0.0001 micron (equals to 0.00000004 inch!) is known as reverse osmosis, and it is the technology used to manufacture bottled water. Non-RO water filters are far less effective, and the pore size of this filter media is significantly larger. Only up to their micron rating can they filter out coarse particles, sediments, and elements. Most dissolved chemicals cannot be filtered out at finer levels. As a result, compared to Reverse Osmosis filtration, the water is significantly less pure and safer.

Rainwater, which starts its natural cycle as rain, comes into contact with a variety of contaminants before reaching your tap. Total Dissolved Solids are the numerous minerals (including heavy metal ions) and salts that have been dissolved by water during this cycle (TDS). The PPM (parts per million) value of inorganic dissolved compounds in water is measured by a TDS meter.

Pesticides, rust, heavy metals, arsenic, and fluoride, among other dissolved impurities, are detrimental to the human body. They also make water taste bad. When these dissolved contaminants are removed from water using the appropriate water purifier, the water becomes both healthful and tasty.

Boiling destroys bacteria and viruses, but it doesn’t get rid of hazardous dissolved pollutants including pesticides, rust, heavy metals, arsenic, fluoride, and other toxins. Boiling water only aids in the removal of physical contaminants found in water. Cholera, hepatitis A and B, jaundice, typhoid, and even cancer can all be caused by the presence of such pollutants in water.

The purifier can readily produce pure drinking water for more than 5 years with regular maintenance.

Is it more expensive to use a RO water purifier instead of packaged drinking water?