Pureit Vital Max (RO+Mineral+UV)

Stage 1^st:

Pre-Sediment Filter: Removes fine & coarse particulate impurities/dirt & improves the life of carbon filter.

Stage 2^nd:
Pre-RO Carbon Filter: Removes chlorine & organic compounds like harmful pesticides. It also absorbs bad taste & odor causing organic compounds inside water.

Stage 3^rd:
Mesh Filter: Filters water further to ensure removal of finer particulate impurities.

Stage 4^th:
RO Membrane: Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, viruses, protozoa, cyst.

Stage 5^th:
UV Chamber: Acts as an additional stage of purification to further inactivate bacteria, virus & parasites to deliver safe water.

Stage 6^th:
Post RO Carbon Filter: This level of purification acts as a polisher and enhances the taste of purified water.

Stage 7^th:

Carbitrap: Filters water to further ensure removal of loose carbon particles.

Disclaimer

• 1. Under test condition, Input TDS – 750 pm, Turbidity – <1 NTU, Input Pressure – 10 psi, Input Hardness – 300 ppm, Temp: – Room temp
  2. Advance Alert System will alert you 15 days before or 15 hours before completion of every 275 hours of pump running time. The purifier will communicate the alert only if the purifier is in a switched-on condition during the scheduled alert time. Post the completion of the scheduled alert time, auto shut-off of water will be activated automatically for the GKK parts.
  3. Post RO purified water that’s part of purification stages in the device.

  For all water contact parts

  4.  Assumption: 5-member family needing 20 litres of water every day (4 litres per person per day)
  5.  Exceeds USEPA GERM KILL Standard guide by removing 1 crore viruses and 10 crore bacteria from every litre of water. Pureit Vital Max has highest purification rate across filters life when compared to leading RO brands (Kent Prime Plus and Aquaguard Enhance RO+UV) – Under test condition, Input TDS – 750 ppm, Turbidity – <1 NTU, Input Pressure – 10 psi, Input Hardness – 300 ppm, Temp. – Room temp.
  6. 6.5 to 7 liters in running water condition. Basis test report from independent 3P lab and tested as per NSF protocol and USEPA guidelines.